Special welders’ gloves conforming to the standard 12477
Textile gloves whose partial coating gives a degree of protection against permanent contact with oil and grease. The correct size is very important for a high level of dexterity.
course 2 : the gloves - 28: translation missing: en.cours_2.slide_28.title
course 2 : the gloves - 26: translation missing: en.cours_2.slide_26.title
course 2 : the gloves - 25: Sizes of the protective gloves
Gloves in pure nitrile. They must be replaced when they have been contaminated by the product being handled. The material of the gloves can be permeated by chemicals after a short period of contact, or it can tear.
course 2 : the gloves - 20: Resistance of the protective gloves to penetration and permeation by noxious substances
course 2 : the gloves - 18: Resistance to chemical products and micro-organisms : standard EN 374
Gloves for protection against mechanical risks. Many types of gloves conforming to the essential requirements of the standard SN EN 388.
Warning notice: It is essential to check the resistance of the gloves to specific chemicals by referring to resistance tables
Herein below we give a few guidelines for the use of gloves although we take no responsibility for these recommendations. These guidelines do not replace the analyses of physical and chemical risks at each workplace including proper evaluationof technical specifications supplied by distributors and manufacturers.